Home > Healthy Holiday Baskets > Plush-Puppy Gift Baskets
Sort By:
1
Safari Stainless Steel Nail Trimmers For Puppies and Cats Nail Clippers for medium and large dogs Nail Trimmer | Miracle Corp QuickFinder Clipper for Medium Dogs – MC3478
Safari Stainless Steel Nail Trimmers For Puppies and Cats
List Price: $11.99
Our Price: $7.99
Sale Price: $9.89
Savings: $4.00
Safari Stainless Steel Nail Trimmers For Medium and Large Dogs
List Price: $18.99
Our Price: $7.99
Sale Price: $14.89
Savings: $11.00
Miracle Corp QuickFinder Clipper for Medium Dogs – MC3478
Our Price: $57.99
Sale Price: $49.00
Savings: $8.99
Safari Nail Trimmer for puppies and cats, Stainless Steel with vinyl grips.  The small size allows for greater control and visibility when trimming cat claws and tiny puppy nails.  Not recommended for thick nails.

Best suited for small breeds, puppies and cats!

Tips:
For best results, cut dog's nails immediately after bathing
To make the quick of the dog's nail visible, apply baby oil!
Features vinyl covered handles for a secure grip
If pet's nails are very long, cut off a small amount and wait a week before cutting again
Safari Nail Trimmer for medium and large dogs

Our Safari Professional Stainless Steel Dog Nail Trimmers are made from the finest quality stainless steel to give a long-lasting, sharp cutting edge. Nail trimming should be a regular part of your dog's grooming. It is important to your pet's well-being to keep the nails properly trimmed. Be sure to accustom your dog to having its nails trimmed at an early age to make the experience an enjoyable one and increase the bond between you and you dog. It is important to your dog's well-being to keep the nails properly trimmed.
  • Stainless steel
  • Safety stop prevents injury
  • Quality Guaranteed
  • For nail trimming and maintenance
  • Trimming your dog's nails is easy with our professional dog nail trimmer
  • Best suited for medium to large breeds
  • For best results, cut dog's nails immediately after bathing
  • To make the quick of the dog's nail visible, apply baby oil
  • Safety stop prevents injury
  • If pet's nails are very long, cut off a small amount and wait a week before cutting again
Once you've "quicked" your dog, you will find it very difficult for him to trust you the next time you want to trim his nails. Avoid the need for styptic powders and a chase around the house when it's nail trimming time! With this new technology, you will NEVER quick your dog again.

The new QuickFinder Clipper is a nail clipper for dogs (up to 75 lbs), cats and small animals, and birds, that utilizes QuickSensor Technology that senses your pet's quick and gives visual cues as to when it is safe and when it is not safe to begin clipping. Red-Yellow-Green. Green means Go! It is fast, safe and easy to use.

QuickSensor senses with a circuit-board precision, when it is safe to cut, when to be cautious, and when it is not safe to cut. The QuickFinder Clipper is not designed for high volume usage (e.g. grooming salons, veterinary offices, or animal shelters).

How Does It Work? The QuickFinder Clipper works on amazing Quicksensor technology that senses your pet's quick and gives you visual cues as to when it is safe and when it is not safe to begin clipping. The patented QuickSensor detects the changes in frequencies in your pet’s nail due to sensing of the blood vessels and nerve endings in the quick. When the blood vessels or nerve endings are detected, the red light will illuminate. As you move the QuickFinder slowly toward the tip of the nail, the light will change to yellow (caution) and finally to green - safe to cut. The QuickFinder Clipper is battery operated and includes two AAA batteries.

How To Use:
  • Step 1: Power Up: To power on the unit and keep powered up slightly squeeze handles together until red light only is illuminated (continue to keep handles slightly squeezed together to keep power on). If all lights illuminate and remain on, there is insufficient power and batteries must be replaced. If green light stays on, turn unit off by releasing handles, wait two seconds for unit to reset and restart power up phase again. Once red light stays illuminated unit has sufficient battery power and is ready for operation.

  • Step 2: With unit powered up (red light on), insert nail into fixed blade hole from under side of clipper. Keep nail at 90º angle and against sensor side of the fixed blade hole. Move cutting blades toward base of nail far enough that quick in the nail will be detected for the first time. The red light will flicker and remain on. This sets the sensor to the quick in the nail. Note that the nail should continually be on the sensor side of the hole during sensing for sensing to occur.

  • Step 3: Maintaining power to unit, move cutting blades back towards nail tip away from nail base. The yellow light may briefly illuminate as blade and sensor approaches nail without quick. Continue moving cutting blades outward until green light illuminates indicating a safe cut. It is not safe to clip when yellow or red lights are on.

  • Step 4: While maintaining position and angle (90º) of clipper, squeeze handles together in firm swift motion to avoid crushing nail. It is normal for green light to turn off at end of clipping action after blade has cut through nail. If red light stays on, power off device and restart clipping process (Step 1). The QuickFinder will automatically turn off in open position (Handles not depressed).
  • Miracle Corp QuickFinder Nail Clipper Deluxe – MC3489
    Miracle Corp QuickFinder Clipper Deluxe – MC3489
    Our Price: $77.99
    Sale Price: $72.99
    Savings: $5.00
    Our patented design utilizes sensor technology to detect nail differences between the live blood of your pet's quick, and the dead skin of the nail and claw.

    The new QuickFinder deluxe is a nail clipper for larger dogs that utilizes QuickSensor Technology that senses your pet's quick and gives visual clues as to when it is safe and when it is not safe to begin clipping. Red-Yellow-Green. Green means Go! It is fast, safe and easy to use. QuickSensor senses with a circuit-board precision, when it is safe to cut, when to be cautious, and when it is not safe to cut.

    QuickSensor senses with a circuit-board precision, when it is safe to cut, when to be cautious, and when it is not safe to cut. The The QuickFinder deluxe is designed for high volume usage (e.g. grooming salons, veterinary offices, or animal shelters).

    How Does It Work? QuickFinder deluxe works on amazing Quicksensor technology that senses your pet's quick and gives you visual clues as to when it is safe and when it is not safe to begin clipping. The patented QuickSensor detects the changes in frequencies in your pet’s nail due to sensing of the blood vessels and nerve endings in the quick. When the blood vessels or nerve endings are detected, the red light will illuminate. As you move the QuickFinder slowly toward the tip of the nail, the light will change to yellow (caution) and finally to green - safe to cut. The QuickFinder deluxe is battery operated and includes two (2) LR44 (AG13) batteries.

    How To Use:
  • Step 1: Keeping nails, fingers, and paws away from the clipper sensor and cutting blades, turn the clipper on by pushing and releasing the power button (see Illustration 4). When the unit is turned on, the YELLOW light will blink on the frosted signal strip and will continue to blink for several seconds (see Illustration 5). When the unit has self-calibrated (the sensor has readied itself), the YELLOW light will turn off and only the RED light will remain on. Then release the safety latch. If you release the safety latch before powering on the unit, the unit will not calibrate properly. (Power on first) The QuickFinder deluxe is now ready to begin clipping your pet’s nails.

  • Step 2: With sensor ready to read the quick and with the sensor facing the paw, insert nail tip through cutting blades. Be sure the nail is positioned toward the sensor. The clipper and sensor are designed to operate correctly when the cutting blades are at a right angle to the nail. Keep the nail at a right angle to the clipper blades throughout the process. The sensor registers blood in the quick, but will also register blood in your pet’s paw or in your own finger. It is important to be sure only the quick in your pet’s nail is being detected and not the blood from your hand or your pet’s paw. Be sure to keep the paw and your hand and fingers away from the sensor.

  • Step 3: With the tip of the nail inserted through the cutting blades, move the clipper toward the paw to the base of the nail (see Illustration 10). The light will remain RED even after it has detected the quick. Once the QuickFinder deluxe has detected the quick at the base of the nail, begin moving cutting blades back toward tip of nail (see Illustration 11) until the frosted signal strip illuminates GREEN indicating you have cleared the quick and it is safe to cut. (The YELLOW light may briefly illuminate as the blade and sensor approach the area of the nail near the quick. It is not safe to clip when YELLOW or RED lights are on.)

  • Step 4: While maintaining position and angle (90º) of clipper, squeeze handles together in firm swift motion to avoid crushing nail. It is normal for GREEN light to turn off at end of clipping action after blade has cut through nail. If RED light stays on, power off device and restart clipping process (Step 1). The QuickFinder deluxe will automatically turn off in open position (Handles not depressed).
  •    
     
    1